This post may contain affiliate links. If you lot purchase something through the link, I may receive a modest commission at no extra charge to you.

Spring to Tutorial

Add vinyl decals to polyester numberless easily and without burning the material! These tips will help you learn how to employ a rut press on polyester bags and other heat sensitive materials.

Just keep swimming Finding Nemo svg file on a polyester swim bag.

If you've e'er experimented with your Cricut EasyPress (or a traditional rut press) yous've probably burned materials. It happens as we acquire, especially if nosotros're using fragile or oestrus sensitive materials.

What is a heat sensitive material? Things like polyester, silk, wool or imitation leather all need lower heat settings then that yous don't burn the fabric while pressing a design onto it.

The best way to notice what temperature to employ is by referencing a heat settings guide. Cricut has ane that I use a lot and information technology'due south very accurate.

Just keep swimming Finding Nemo svg file on a polyester swim bag.

When using a Cricut EasyPress y'all need to exist very careful with the amount of pressure you're using. Pressure tin can make or suspension a project and you need to brand sure that you are using consequent force per unit area to terminate the vinyl from lifting.

What exercise I mean by vinyl lifting? You lot tin see what happened to this t-shirt later I washed it. The vinyl lifted and came right off the shirt because of uneven force per unit area with my EasyPress.

Because the swim bag I used has zippers and seams everywhere, I had to be very conscientious to go an even press on my vinyl. Using a heat pressing pillow will help prop up the role of the bag you desire to press on and will make information technology easier to get an even press on your cloth.

A pressing pillow is a must-have tool if y'all like using heat transfer vinyl for your projects.

Just keep swimming Finding Nemo svg file on a polyester swim bag.

    Nosotros won't send you lot spfafdaam. Unsubscribe at any time.

    Tips for using a Cricut Easypress on polyester numberless.

    What heat settings do yous apply for a polyester bag?

    Because I own the Cricut Easypress I similar to reference their user guide for all of my projects.

    You tin put in the type of estrus transfer vinyl you're using, the material you're putting your decal on, and whether you're using a pressing pillow (I recommend using 1!) or a towel.

    For a Polyester Bag it'southward recommended you use these settings:

    • Temperature: 315 degrees
    • Time: 30 seconds
    • Pressure level: Light
    • Peel: Warm
    • Additional Tips: Flip material and press for an extra 15 seconds

    What happens if I press the design for too long or use also much heat?

    The short answer is that you volition burn your material. You can also melt the cloth or discolor it depending on what it is. That's why information technology'due south really of import to check what rut settings you should use with your estrus press.

    Just keep swimming Finding Nemo svg file on a polyester swim bag.

    What if the bag has pockets on the inside and the seams cause the heat press to not lay flat on the bag. How do I get an fifty-fifty printing?

    I had this trouble on my pocketbook and it was frustrating to pull up the carrier sheet on tiptop of my vinyl fourth dimension and time once again to notice that certain spots all the same hadn't stuck to the bag.

    Whenever you are pressing near a seam or zippers you should be using a pressing pillow. This will elevate the department of the bag then that the zippers, buttons or seams won't go far the way.

    I highly suggest getting a bundle with different sized pressing pillows (like this one from Rut Press Nation) so that you lot can utilise them for all kinds of projects.

    How to use a Cricut EasyPress on a polyester bag

    FAQ'Southward FOR USING A Rut Press ON A POLYESTER Handbag

    How do y'all know if an particular is estrus sensitive?

    All items should come with a tag inside for care/wash instructions.

    Find information technology and read to come across what information technology says about heat. If you lot run into the words "dry clean only" or "dry on low heat" it ways y'all need to use lower temperatures if yous're going to oestrus press them.

    Sensitive fabrics will not hold up to high rut or prolonged exposure to heat.

    Practise y'all demand to preheat the polyester bag before pressing your design on it!

    Yes! Preheat your pocketbook for 5 seconds then press your blueprint like you normally would.

    Should I exam the fabric before pressing a large pattern on information technology?

    Yep! Find a pocket-size section of the textile and apply your heat press on it. If you notice the spot becomes discolored or burnt you most likely have your estrus printing too hot.

    Double cheque the settings confronting the Cricut Easypress oestrus guide. If you used the right oestrus settings try testing in a small spot again but for a shorter amount of time.

    Just keep swimming Finding Nemo svg file on a polyester swim bag.

    OTHER Estrus TRANSFER PROJECTS TO Endeavor!

    • How to apply heat transfer vinyl on t-shirts
    • Beginners guide to craft vinyl: adhesive vinyl vs heat transfer vinyl
    • How to put heat transfer vinyl on forest
    • How to use heat transfer vinyl on napkins
    • Why heat transfer vinyl bubbling when using a estrus press

    Instructions

    1. Download your SVG files and upload them into your software. I used the DORY file from here and the WHALE file from hither.
    2. Cut and weed your designs and set them aside. (make sure you flip your designs in the software before hitting Cut).
    3. Heat up your Cricut Easypress to 315 degrees. Set it aside.
    4. Once your heat press is ready to go, spot test a minor section of the bag to brand sure information technology can stand up to the heat (I recommend using the bottom).
    5. If your bag is fine, put your pattern on the bag and and so lay the teflon canvass on top of it.
    6. Lay your heat press on the teflon sheet and press for 30 seconds. Make sure you lot're using Low-cal PRESSURE, practise non put your whole trunk weight downwards on the printing, this can cause your material to burn.
    7. Pull the teflon sheet off your vinyl and and so carefully remove the carrier sheet. If you notice your vinyl isn't stuck to the bag and so repeat stride 6. (SEE Note #3)
    8. Cricut recommends you to plow the polyester material over and press for an additional fifteen seconds. I did not do this because mine is a bag and I couldn't fit my oestrus press in the compartments but if you can do this you lot should!

    Notes

    1. Always cheque the intendance instructions on the tag inside the bag before pressing. This will tell you lot if it'due south a heat sensitive particular or not!

    2. Test a pocket-sized spot of the purse with your estrus press before you lot printing the design. I recommend the bottom of the bag.

    three. If your pocketbook has pockets on the inside you may have an event pressing your design because of the pocket seams. They'll stop your rut press from getting an even press and the vinyl that goes over the seams will not stick to your bag.

    To solve that detail problem exercise one of two things:

    • Turn your Cricut Easypress on the side (taking intendance not to burn yourself or drib it) and utilize the edge to oestrus the part of the vinyl that isn't sticking, OR
    • Use an iron to rut that section of vinyl.